|
Description:
|
Includes V100 CameraCushion™ divider.
For a large 35mm SLR body (D1x, 1DII etc.) with a longer lens attached like an 70-200/2.8, 80-400 VR, 100-400 etc. with the hood stowed. Front pocket will hold one shoe-mount flash unit.
When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt.
Does not include a shoulder strap or waist belt.
C580 fits a "small or large body" with "medium lens" attached as defined on this page.
Originally designed for a pro-sized 35mm SLR body (including D1 or 10D W/ booster, 1Ds etc.) and a 70-200/2.8. (or 80-200/2.8) lens with the hood in the storage position.
This case will also accommodate any body/lens combo listed for the shorter C500 by using the CameraCushion™ you can elevate the body with shorter lenses so it sits near the top of the case.
When used on a waistbelt, the optional Y302 strap kit is recommended to prevent the top of the case from pulling away from the belt.
From the field the following reports
(3/06): "Just wanted to let you know that the C580 fits my new Hasselblad H2 with 50mm lens and shade like a glove! I may end up putting a shorter rubber eyepiece on the viewfinder, as its about 1/4" longer then desired, but that is about it. I have the RRS L bracket on for the camera."
and another report (5/06):
"I thought you would like to know that the large holster case that I ordered earlier this month fits my Hasselblad H2D with the macro 120mm lens with hood on (extended). I can just reach right in and grasp the battery grip, pull the camera out and up to my eye, support it with my left hand, and shoot. All in 5 seconds!"
U.S.
I.D. Specs
Top = 6d*x7w"
Bottom = 4.5x4.5"
Height = 12"
Volume = 350 cu in (includes 50 cu in pocket)
Weight = 12 oz.
Metric
I.D. Specs
Top = 15d*x18w cm
Bottom = 11.5x11.5cm
Height = 30.5cm
Volume = 5.8 lit
(includes 800 ml pocket)
Weight = 340 g
Double-wide allotment on belt.
The C500, C580 or C640 will hold a "Large SLR Body"
Sample bodies that will fit. With most bodies, there is enough room with a Arca-Swiss type quick-release plate on it too:
• Canon 1D-series bodies or Canon 5D, D30, D60, 10D, 20D, Digital Rebel, Elan II, A2E, 1n, 1v, EOS1v or EOS3 with the optional vertical battery grip/power booster or
• Nikon D2-series, D1, D1x, F5 or N8008, N6006, N70, N90s, F100, F4s
The C500/C580/C640 (all have the same top opening dimension) cases will yield a comfortable fit for a body up to 16cm (4.75") deep or a tight fit for a body up to 17.5cm (6.75") deep. (The depth dimension of the these cases is 15cm (6"), which is based on the rectangle-shaped opening. SLR bodies are triangular shaped, so this series of cases will house a body deeper than the rectangular "depth" dimension).
The C500, C580 or C640 will also hold a "Small SLR Body," but the body will move around a little inside the case, unless an the V100 CameraCushion is placed vertically near the prism.
C580 will hold a body with a "Medium Lens" up to 2.45cm (9.5") long* or a combined body/lens height up to 30.5cm (12").
• Canon 70-200/2.8 (reg or IS), 75-300/4.5 IS, 70-200/4, 35-350/3.5, 300/4, 200-400/5.6 & 100-400/4.5 IS with hood in the reversed storage mode. 24-70/2.8 with the hood in the shooting position.
• Nikon VR 70-200/2.8, AF-S 80-200/2.8 IF-ED (Silent Wave), 70-300/4, 300/4 & many other long prime lenses with hood in storage mode. Will also fit the older style 80-200/2.8 w/ the HB-7 hood in the shooting position.
Also fits Tamron 28-105/2.8 with the hood in the shooting position.
|
;)
Registered: November 2005