|
Description:
|
Includes Y515 shoulder strap (not shown) & A257 Body Pouch.
* For a 400/2.8 lens with a body attached and hood reversed
* For most 600/4 lenses w/o a body attached
* For Canon 600/4 IS with body atached
* Also holds 300/2.8, 500/4 or 500/4.5 lenses with a body attached and hood reversed -- we highly recommend the $19 L029 Foam Insert when using these smaller lenses. Otherwise choose the more compact L311 or L511 case.
PolyCore™ case with semi-rigid sidewalls & bottom*
• For 400/2.8 lenses with a body attached and hood reversed.
• For most 600/4 lenses without the body attached and hood reversed (with leatherette lens cover). Also will hold some 600s with a body attached including the Canon 600/4 IS with a body (20D, 1Ds II etc.) the leatherette cap attached & the hood reversed.
• For 300/2.8, 500/4 or 500/4.5 lenses** with a body attached and hood reversed (with leatherette lens cover).
This case will not will not hold Nikon 600/4 AF-S or AF-S II lens unless a Wimberely adapter plate is used (#AP-652 or #AP-452, $79.00) in place of the OEM "very tall mounting foot" supplied by Nikon.
**Note: This case is sized to fit large booster-driven SLRs bodies (with a little extra room so you can reach in and around the body) and 400/2.8 lens. You may find the 300/2.8 lens dwarfed by the large inside diameter of this case. We highly recommend the $19 L029 Foam Insert when using a 300mm or 500mm with this case. Otherwise choose the more compact E980, L311 or L511 instead.
*PolyCore™ is an exclusive Kinesis design offering semi-rigid side walls yielding more protection than traditional soft-side cases.
U.S. Specs
21h x 8.8" dia I.D.*
22h x 10.2" dia O.D.**
Volume = 1127 cu in
Weight with A257 pouch & shoulder strap: 4 lbs. 8 oz.
Metric Specs
53h x 22.5cm dia I.D.*
56.5h x 25.8cm dia O.D.**
Volume = 18.5 lit
Weight with A257 pouch & shoulder strap: 2kg
Double-wide allotment on belt or packframe.
(Realistically, this case is too large to conveniently wear on a belt).
*There is a little give in the lid Velcro, allowing a lens/body combo up to 54.5cm (21.5") to fit inside this case.
**The lid outside diameter is 28cm (11").
May 2005 improvements: the case inside height was lengthened by 15mm to 53cm to accomodate Canon 600mm's.
|
;)
Registered: November 2005